5-114.3mm (5x4.5)
| Year | Submodel | Pattern (Metric) | Pattern (Std) |
|---|---|---|---|
| 2011 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2011 | 2wd SE | 5-114.3mm | 5x4.5 |
| 2011 | AWD SE | 5-114.3mm | 5x4.5 |
| 2010 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2010 | 2wd SE | 5-114.3mm | 5x4.5 |
| 2010 | AWD SE | 5-114.3mm | 5x4.5 |
| 2009 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2009 | 2wd SE | 5-114.3mm | 5x4.5 |
| 2009 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2009 | 4wd SE | 5-114.3mm | 5x4.5 |
| 2008 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2008 | 2wd SE | 5-114.3mm | 5x4.5 |
| 2008 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2008 | 4wd SE | 5-114.3mm | 5x4.5 |
| 2007 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2007 | 2wd SE | 5-114.3mm | 5x4.5 |
| 2007 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2007 | 4wd SE | 5-114.3mm | 5x4.5 |
| 2006 | 2wd Limited | 5-114.3mm | 5x4.5 |
| 2006 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2006 | 4wd Limited | 5-114.3mm | 5x4.5 |
| 2006 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2005 | 2wd Limited | 5-114.3mm | 5x4.5 |
| 2005 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2005 | 2wd XLS | 5-114.3mm | 5x4.5 |
| 2005 | 4wd Limited | 5-114.3mm | 5x4.5 |
| 2005 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2005 | 4wd XLS | 5-114.3mm | 5x4.5 |
| 2004 | 2wd Limited | 5-114.3mm | 5x4.5 |
| 2004 | 2wd LS | 5-114.3mm | 5x4.5 |
| 2004 | 2wd XLS | 5-114.3mm | 5x4.5 |
| 2004 | 4wd Limited | 5-114.3mm | 5x4.5 |
| 2004 | 4WD LS | 5-114.3mm | 5x4.5 |
| 2004 | 4wd XLS | 5-114.3mm | 5x4.5 |
The Mitsubishi Endeavor uses a 5-114.3mm (5x4.5) bolt pattern. This is also known as the PCD (Pitch Circle Diameter). When shopping for aftermarket wheels, ensure the center bore matches or is larger than the vehicle's hub. If the wheel bore is larger, hub centric rings are recommended to prevent vibration.
Lug Hardware: Always use the correct lug nuts or lug bolts for your specific vehicle year. Torque them to the manufacturer's specified setting.
© Cars & Collectibles. All rights reserved.